Hey, no offense, however your swim spa cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it happens to all spa owners at some time or another; water is among nature’s most erosive substances. Moisture permeates in and ends up being trapped in between the outer vinyl shell and the plastic wrapped foam cores. The warm, damp environment is perfect for mold and mildew and other kinds of foul-smelling things.
If wetness has permeated further into the cling wrap foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and smelly slime, however likewise make the cover actually tough to remove, and not as effective at keeping the heat in the spa. Time for a much better kind of swim spa cover.
Stinky Swim Spa Cover?!?
• Broken or harmed. Cracked foam cores, ripped or used areas, torn seams. A spa cover that loses it’s arched roofing line, to keep water draining pipes off correctly, will ultimately start to puddle water, which is most likely time to buy a new swim spa cover! A spa cover with threadbare areas in the vinyl is likewise bad news, and although you can fend off the unavoidable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Remove your spa cover weekly for 2 hours of airing out. A better cover can withstand longer durations, however it’s a great habit to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to enable moisture to leave do so, however don’t get rid of fragile foam panels unless absolutely required.
• Poorly Made. It’s easy to make a swim spa cover with tape and staples, but it won’t stop moisture very well. Even the best foam filled covers with vacuum-wrapped and heat welded seam are not going to keep the intense wetness from your spa from reaching the foam core. The only real solution is a swim spa cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not kept regularly with sanitizer and filtering, or is not shocked typically enough, germs and algae can make the most of a congenial environment to grow. Low pH, high chlorine or high ozone levels can also deteriorate the underside of your spa cover. Since the cover is so close to the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent foul-smelling spa covers. (Sorry however this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing, that can be worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times each year, so that it always looks great, and is safeguarded from the elements. Again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will assist your spa dealer pay their bills.
Your Choices
Repair Your Hot Tub Cover!
• Remove to Safe Location: This first step might appear obvious, but you require a good place to permit the cover to sit undisturbed from family pets, wild animals, and winds. It must be a sunny place if possible, or a dry indoor area with low humidity can also be utilized.
• Deodorize & Disinfect: You might not need to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your spa cover, weird chemicals can wind up in your spa water. Gently clean all outside surface areas with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this ought to be prevented if possible, since the panels might end up being damaged during removal or cleaning. However if you identify that there is something slimy within, you can usually unzip and remove the panel for a cleansing inside and out.
How typically does your spa dealer expect you to do all this? If your swim spa is safeguarded from most sun and rain, twice each year. If it’s out in the open it ought to be 3-4 times per year. Let that sink in a minute.
Much better Choice
The simplest remedy for a stinky swim spa cover is to just buy a various type of swim spa cover A stinky swim spa cover simply means that your cover is taking on moisture, and things are starting to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has sealed air chambers rather will avoid providing the mold and mildew a place to grow in the first place.