Hey, no offense, but your hot tub cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at one time or another; water is among nature’s most erosive compounds. Moisture leaks in and ends up being trapped between the outer vinyl shell and the cling wrap foam cores. The warm, wet environment is best for mold and mildew and other kinds of stinky stuff.
If moisture has actually penetrated even more into the plastic wrapped foam core, the cover ends up being waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, but likewise make the cover actually hard to remove, and not as reliable at keeping the heat in the spa. Time for a better kind of hot tub cover
Stinky Hot Tub Cover?!?
• Broken or harmed. Cracked foam cores, ripped or worn spots, torn seams. A hot tub cover that loses it’s arched roofing system line, to keep water draining pipes off properly, will ultimately begin to puddle water, which is most likely time to buy a new hot tub cover! A spa cover with threadbare spots in the vinyl is likewise bad news, and although you can ward off the unavoidable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Eliminate your hot tub cover weekly for 2 hours of airing out. A much better cover can hold up against longer durations, however it’s a good routine to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to allow wetness to leave do so, but don’t remove delicate foam panels unless absolutely essential.
Actually, this is just hogwash. The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, hot tubs by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the hot tub.
• Poorly Made. It’s simple to make a hot tub cover with tape and staples, but it won’t stop moisture effectively. Even the very best foam filled Hot Tub Covers with vacuum-wrapped and heat bonded joint are not going to keep the extreme wetness from your spa from reaching the foam core. The only real option is a hot tub cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained frequently with sanitizer and filtering, or is not surprised frequently enough, germs and algae can benefit from a hospitable environment to flourish. Low pH, high chlorine or high ozone levels can likewise deteriorate the underside of your hot tub cover cover. Since the cover is so near the spa, it absorbs the chemistry of the spa. Clean, clear and hygienic water is the best environment to prevent stinky spa covers. (Sorry but this is simply BS) The fact is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Hot Tub Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing, that can be worse than no roofing at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times per year, so that it constantly looks fantastic, and is safeguarded from the elements. Again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will help your spa dealership pay their costs.
Fix Your Hot Tub Cover!
• Remove to Safe Location: This primary step may appear apparent, but you require a good location to permit the cover to sit undisturbed from pets, wild animals, and winds. It ought to be a warm location if possible, or a dry indoor area with low humidity can also be used.
• Deodorize & Disinfect: You might not need to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your spa cover, weird chemicals can wind up in your spa water. Gently clean all outside surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this must be avoided if possible, because the panels might end up being damaged throughout removal or cleansing. However if you identify that there is something slimy inside, you can typically unzip and eliminate the panel for a cleaning inside and out.
How typically does your spa dealership expect you to do all this? If your hot tub is protected from most sun and rain, two times annually. If it’s out in the open it ought to be 3-4 times each year. Let that sink in a minute.
Much better Choice
The most convenient cure for a stinky hot tub cover is to simply buy a various sort of hot tub cover A stinky swim spa cover merely means that your cover is handling moisture, and things are starting to grow! Hot Tub Covers from SpaCap.com that doesn’t use foam but has sealed air chambers rather will prevent providing the mold and mildew a place to grow in the first place.