Swim Spa Covers and Snow Loads

SpaCap Swim Spa Covers in cold

Replacing your Swim Spa Cover because the snow squashed it?

What if there was a Lightweight Swim Spa Covers that could handle that much snow? Yes, even as much as you had.
Excellent news there is.
First lets take a minute and go over why the one you have to change didn’t make it.
The foam in the Swim Spa Cover broke under the weight of the snow.
Was it due to the fact that the metal channel that goes through the center of the Swim Spa Cover on both sides wasn’t sufficient support?
It was due to the fact that the weight of the snow would have broken a 2×4 if it were trying to bridge an eight-foot space like that.
Exactly what caused the Swim Spa Cover to collapse was that it was aiming to make a bridge over the swim spa, from one side to the other. Usually not an issue until the Swim Spa Cover itself gets saturated, however in this case it was the added weight of snow that simply was excessive to manage.
So, if you get a Lightweight Swim Spa Covers that doesn’t attempt to bridge the space however supports itself by resting on the water, that would be a huge improvement.
Still, you did get a heap of snow. Would it be able to manage that much?
Short response, yes.
It seems that every few years, someplace in the nation is getting snow that will be explained by their regional news as “scriptural percentages” which overwhelms the location, closes down schools, roads, airports and life in general up until the storm passes and people can remove.
Throughout those winter season storm events, when the everyday routine of the public becomes focused on enduring, how the swim spa is doing simply isn’t that crucial. Understandably so.
Once the storm passes and individuals begin to examine the damages, it is not uncommon for many or all of the outside Lightweight Swim Spa Covers to be part of the tally.

Denver has had its share of storms like this.
Those Epic storm events.
Patio area roofing systems collapsed. Industrial structures had roofs collapse. Needless to say, practically every outside Swim Spa Cover needed to be replaced.
With one exception. As insurance coverage representatives hurried around to help their consumers determine exactly what had to be changed, they found that every Swim Spa Cover that did NOT need to have a new cover had the very same brand of cover. Those Lightweight Swim Spa Covers were fine. Not only did those Lightweight Swim Spa Covers not require to be replaced but also every swim spa that was covered by one was fine too. The swim spa was still running; the water was still warm even when the property owners might not get outside to shovel snow off of them. Even on the swim spas owned by people that were out of town throughout the storm.
The insurance coverage representatives began suggesting that their clients replace their Lightweight Swim Spa Covers with that brand name. All those Lightweight Swim Spa Covers that had the ability to stand up to that impressive snow load were SpaCap.com Lightweight Swim Spa Covers No other Swim Spa Cover was suggested.
That says something.
The SpaCap.com Lightweight Swim Spa Covers had the ability to handle the storm.
When the wind blew in ahead of the storm, the SpaCap.com Lightweight Swim Spa Covers remained in place. Rigid foam filled covers, even covers that were too heavy for one individual to lift blew off.
The hail won’t damage a SpaCap.com since it isn’t stiff. The air inside the cover allows it to give. No matter how big the hail gets, it will not damage a SpaCap.com Swim Spa Cover
And the snow, several feet deep, didn’t harm a single one.
Prior to you simply purchasing another conventional Swim Spa Cover, we recommend you visit SpaCap.com and get the only sort of cover that truly can handle the snow.

Is there a Swim Spa Cover that can deal with a severe snow load?
Did Mother-nature dump on your Swim Spa Cover?
Snow Crush your Swim Spa Cover?
Looking for Lightweight Swim Spa Covers that can deal with a ton of snow?