SwimSpa Covers: When to Replace

SwimSpa Covers are necessary, if you intend to maintain that water warm inside the swim spa. Regrettably, SwimSpa Covers do not last permanently. Regardless of what your spa dealer might possibly have actually promised, there shall come a time that you are have to require a new Lightweight SwimSpa Cover

Just what are the indications when a swimspa cover has given up the ghost? There might be obvious indications, in addition to some that are not so apparent signs. Right here are 5 indications of swimspa cover distress to take into consideration.

Saggy Cover

If your foam filled up swim spa cover collects water on the surface, you’ll require a brand-new Lightweight SwimSpa Cover This symbolizes that whatever was provided in terms of the support of the foam boards is currently curved or damaged. You’ll discover typically a C-channel that runs along both halves of the spa cover, where they fulfill at the joint. Some cover manufacturers will utilize products like aluminum or thin steel at this point, which will certainly bend under weight (dogs, kids, snow), or (even more usually) due to the weight of the cover itself.

If this is the case, trying to bleed a longer time from the cover is simply going to wind up costing you more going forward given that whatever insulation worth it might perhaps have possessed is addressed this phase. Delaying the inescapable will just cost you much more in your power bills. However a lot more significantly thinking about an usage perspective, you are likely unlikely to wish to tinker your cover when it has water on top of it. Eventually, you’re using your swim spa much less, which is certainly a sin. Do not be a sinner.

Something to think about here. Whatever your hot tub supplier needs to claim concerning it, if he only intends to offer you one more foam filled SwimSpa Covers, it is 100% absolutely going to become just like the one you have to change now.

It won’t matter whether it is shrink covered in Kevlar and reinforced with titanium, if it has foam inside, it is destined fall short.

Puddle Cover

Water is heavy, at 8 pounds. per gallon, it could build up rapidly. One more case of damaged reinforcement network. Possibly started with a tiny crimp in the network, which started to puddle some water, and a whole lot more water– and currently it resembles a new SwimSpa Covers is in order.

Similar to Saggy Cover, this is due to utilizing foam panels above a swim spa. Foam panels will saturate from the steam coming off the spa water. Not one thing will stop it apart from not utilizing foam within your SwimSpa Covers!

The spa dealer may recommend you to try to turn the panels over inside the cover to add to its helpful life. Except the zippers in addition to the plastic product weren’t made to be opened and shut past the preliminary stuffing of the foam.

Once a cover begins a steady pool, it could never ever be turned around. It’s time to order a replacement SwimSpa Covers As we stated above, putting it off indicates you’ll be using the swim spa much less (a sin) and wasting cash on the home heating costs.

Water Logged SwimSpa Cover

This might be a SwimSpa Covers that weighs regarding 3x what it did when it was brand-new. They typically obtain so hefty that they end up being alongside impossible to utilize short of the aid of a Seal Team. They could likewise harm SwimSpa Covers lifters once they get too heavy. That’s since the cover lifter is not made to take care of a heavy cover. Wager the supplier really did not point out that when he offered it to you.

When the foam core is handling water– and also, is not draining pipes. This does not symbolize that rain water has actually somehow entered into your cover, or snow or an additional outdoors resource. It happens when heavy steam increases from the cozy spa water then because it’s a very small molecule, solves into the foam. Once it gets in of the foam it cools as well as turns back right into water, and also ends up being trapped as a result of the fact that the water molecule is as well big to drop out.

The most effective method to avoid it would certainly be to never ever use a foam loaded cover on the swim spa. Despite what the supplier claims to cover it in or the means they package it, the foam will at some point become saturated. Duration.

It is time for a brand-new replacement hot tub cover. Once again, placing it off at this point is just most likely to cost you much more in your power intake and also unless you have a Seal Team coping with you, you typically aren’t going to be utilizing your spa very typically. (Still a transgression).

If you want to be creative, you could take the cover from your spa and also store it in your garage for a number of months. As soon as the SwimSpa Covers is away from the moisture as well as being kept inside a completely dry place, eventually the moisture within the cover will evaporate (back to a smaller sized molecule) as well as naturally the foam will lighten once again. It takes months for it to completely dry completely in which situation you need to have another replacement cover for your spa while you wait. Note: The cover may still warp hugely out of shape while it dries out.

If you choose to rotate your covers every three months, you may be capable of making them last till the products begin to find apart. See Below.

Torn & Worn SwimSpa Cover.

Whenever the material (marine quality vinyl on the common foam filled SwimSpa Covers) is exposed to its restriction of sunlight and weather, it ends up being brittle and begins to deteriorate. Ultimately, openings and also tears take place that will.

Because ALL Plastic, even the most expensive Marine Quality, are ranked by HOURS outdoors.

Making use of a spa cover protectant is simply another means for cover suppliers to take your cash. If you wish to spend on weekly basis rubbing down your SwimSpa Covers with conditioner, be our visitor yet the smart thing to do would certainly be to get the cover that does not have VINYL on the outside. Like state the SpaCap.com Lightweight SwimSpa Cover that use Sunbrella Marine material, which is ranked by YEARS outdoors.

Still, if the Swim Spa Covers isn’t hefty yet, you might to delay getting an additional immediately giving you don’t mind the appearance of Air duct Tape. If you would such as a few ideas, have a look at some episodes of the “Red Green Show.” Red covers the finer points of Duct Tape.

Smelly SwimSpa Cover.

Mildewy, mold, old damp pet dog– whatever your SwimSpa Covers smells like, if it’s a bad odor, that possibly suggests that you now have microorganisms forming inside the hot tub cover. It probably likewise implies the cover is water logging (see above).

Now we have actually crossed over from troublesome to undesirable.

Just what are you breathing in when this is what you scent?

Completely taking apart of the cover, and splashing it down with Lysol won’t help! Considering that the resource of the smell, AKA the mold and mildew as well as mildew are stuck inside the foam! The most effective you could be able to complete would certainly be to kill exactly what’s on the beyond the vinyl or foam nevertheless you are not most likely to touch exactly what’s inside the foam. Plus now your cover scents like Lysol, absolutely nothing eliminates the state of mind much faster compared to inhaling something that reminds you of just how the college janitor cleaned up vomit.

The origin of the trouble? That premium quality foam used in typical hot tub covers. In spite of just how much a supplier might attempt to offer how it is very immune to water absorption and also germs development, it will certainly still take place as well as they recognize it.

When you occur to be ready for a new Lightweight SwimSpa Cover, make certain that it’s not used a foam core.

If you were curious regarding your SwimSpa Covers making it an additional year, don’t wait. It’s your basic instinct informing you something important– swim spa season is year-round! Prepare now!

The Best SwimSpa Cover

Swim Spas represent special obstacles when it concerns covering them.
We can all concur that the swim spa has to be covered when not in use for all the same reasons a hot tub requires a cover. The obstacle is that because of the length of the swim spa and the height of the sides, eliminating and changing the Swim Spa Cover can be a lot more difficult.
Getting a brand-new swim spa is an exciting occasion in life. You’re looking forward to the exercise you’ll receive from using it. Possibly you’re a little relieved to have actually finally selected from the various designs you looked at. At any rate, you most likely weren’t thinking much about the Swim Spa Cover you would use.
Normally, the cover that gets back with your new purchase will be a 4 section rigid foam filled Swim Spa Cover that will split in the center and go off both ends.
No big deal.
Up until it starts to get heavy.
Which it always does.
Every rigid foam filled Swim Spa Cover ever made winds up the same way and it is not the fault of the user. It’s a style defect. Integrated in obsolescence since as soon as it is placed in use over the warm water in your swim spa it is unavoidable.
It’s not from rain, so having a taper won’t make any difference. In fact you might have it under a roof and the Swim Spa Cover will still get heavy.
The factor is the steam from the water. The particles of steam are really little as they rise from the water surface. They make their method into the little cracks and crevices in the foam. Then as the steam cools it forms back into a liquid and becomes caught in the Swim Spa Cover
It happens slowly and on a Swim Spa Cover which is made of private areas, at differing speeds. So eventually you’ll notice one or two of the sections are actually getting heavy. The bar lifters on completions of the swim spa aren’t much assistance due to the fact that you still have to raise that heavy Swim Spa Cover back up onto the spa which is a lot higher than a routine spa.
This is why SpaCap.com developed a different style for their Lightweight Swim Spa Covers
Instead of using several foam panels that will eventually wind up in some landfill, they designed Lightweight Swim Spa Covers that uses air chambers that don’t suck up moisture.
In fact SpaCap.com Lightweight Swim Spa Covers are easy to use, insulate better, will not blow away in a wind storm or be harmed by snow or hail.
Covered with Sunbrella Marine material, these Lightweight Swim Spa Covers will not fade, or fall apart at the seams either. So if you own a swim spa, and you intend to keep using it daily, SpaCap.com has the Swim Spa Cover for it.
If you’re not prepared to order today, bookmark this website so you can find it again when you’re prepared!

Your SwimSpa Cover Stinks

Hey, no offense, but your SwimSpa Cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is among nature’s most erosive compounds. Moisture leaks in and ends up being trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, damp environment is perfect for mold and mildew and other kinds of stinky stuff.
If moisture has permeated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and stinky slime, however also make the cover actually hard to remove, and not as reliable at keeping the heat in the spa. Time for a better type of SwimSpa Cover

Stinky SwimSpa Cover?!?
• Broken or damaged. Split foam cores, ripped or used areas, torn seams. A SwimSpa Cover that loses it’s slanted line, to keep water running off correctly, will eventually start to puddle water, which is most likely time to purchase a new SwimSpa Cover! A SwimSpa Cover with threadbare areas in the vinyl is likewise problem, and although you can stave off the inevitable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Remove your SwimSpa Cover weekly for 2 hours of airing out. A much better SwimSpa Cover can stand up to longer durations, but it’s a great practice to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to leave do so, but don’t eliminate fragile foam panels unless absolutely required.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a SwimSpa Cover with tape and staples, but it won’t stop moisture very well. Even the very best foam filled Lightweight SwimSpa Covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real option is a SwimSpa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not kept routinely with sanitizer and filtering, or is not stunned often enough, germs and algae can benefit from a congenial environment to grow. Low pH, high chlorine or high ozone levels can also weaken the underside of your SwimSpa Cover. Due to the fact that the cover is so near to the spa, it soaks up the chemistry of the spa. Clean, clear and hygienic water is the very best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The reality is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight SwimSpa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be worse than no roofing at all, if an overhanging eave drains water onto the SwimSpa Cover Tidy and condition a spa cover 2-4 times each year, so that it constantly looks excellent, and is safeguarded from the components. Once again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover But it will help your spa dealership pay their bills. If this were actually true a SwimSpa Cover inside would never get smelly and that just isn’t true.

Your Choices

Repair Your SwimSpa Cover!
• Remove to Safe Location: This first step may seem apparent, but you require an excellent place to enable the cover to sit undisturbed from pets, wild animals, and winds. It ought to be a sunny area if possible, or a dry indoor location with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your SwimSpa Cover, strange chemicals can end up in your spa water. Gently tidy all exterior surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, because the panels might end up being harmed throughout elimination or cleansing. But if you figure out that there is something slimy inside, you can typically unzip and get rid of the panel for a cleaning inside and out.

How frequently does your spa dealership anticipate you to do all this? If your swimspa is safeguarded from the majority of sun and rain, two times each year. If it’s visible it must be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.

Much better Choice
The most convenient remedy for a foul-smelling SwimSpa Cover is to simply buy a various sort of SwimSpa Cover A foul-smelling swimspa cover simply implies that your cover is taking on moisture, and things are starting to grow! Lightweight SwimSpa Covers from SpaCap.com that does not use foam however has actually sealed air chambers rather will prevent providing the mold and mildew a place to grow in the first place.

Before You Buy Your Next SwimSpa Cover

What You Should Know Before Buying a New SwimSpa Cover

If you have to replace your SwimSpa Cover this year, there are few essential things you must think about. A SwimSpa Cover is your spa’s first line of defense versus particles and severe weather and is the key to saving money on energy costs as a well-insulated SwimSpa Cover will avoid heat from leaving from the swimspa when it’s not in use.

Here’s what you must understand before purchasing a brand-new SwimSpa Cover

When to Replace a SwimSpa Cover

A SwimSpa Cover usually has to be replaced every 3 to five years if you reside in a northern location and every three to 7 years, if you reside in a warmer area.

Try to find any rips or tears in the vinyl, check the underside of the SwimSpa Cover and try to find wear and tear from mold build-up and chemicals. This takes place since all vinyls are ranked by HOURS outdoors. And the moldy and moldy smell originates from that the foam produces almost best lab conditions for growing mold and mildew.

The solution then to both of these problems would be to change your SwimSpa Cover with one of the Custom Lightweight SwimSpa Coversmade by SpaCap.com At SpaCap.com they utilize Sunbrella Marine material which is rated by YEARS outdoors instead of vinyl, and air chambers rather of foam.

A replacement SwimSpa Cover is needed if your old one is waterlogged and heavy and a struggle to get rid of. This is a clear indication that the foam cores are saturated with water.

Again, another factor not to buy another foam filled SwimSpa CoverNo matter exactly what the spa dealer tells you, the truth is that every foam SwimSpa Cover ever made is going to end up just like the one you have to replace now.

The SpaCap.com Lightweight SwimSpa Covers with air chambers instead of foam don’t have the mold growing problems and they don’t fill with water. They remain light-weight and easy to use for several years to come.

The concept that a thicker foam cover is going to insulate much better is flawed thinking.

A quality foam filled SwimSpa Cover will be from four to six inches thick. A spa dealer will tell you that if a SwimSpa Cover is too thin, it will not be able to stand up versus severe weather condition conditions and you’ll have to change it more frequently.

What saves you money is a SwimSpa Cover that insulates much better than foam. The Custom Lightweight SwimSpa Covers from SpaCap.com insulate much better than foam without the issues of foam.

If you reside in an area that gets a great deal of snow throughout the winter season, a rigid foam cover, no matter how thick will be crushed by a snow load. Which is why numerous ski resorts around the globe have actually switched to Lightweight SwimSpa Covers made by SpaCap.com

Selecting a Color

Picking the right color for your SwimSpa Cover is an enjoyable however essential choice, as they can boost and match your surroundings. Here is where all the color options available from SwimSpa Cover, actually shine. Rather of settling for the five or 6 colors the regional spa dealership has to provide, you can select from more than SIXTY colors offered from SpaCap.com

Do not just purchase another SwimSpa Cover that is going to end up heavy or broken like the one you have now. Go to SpaCap.com and get a SwimSpa Cover that is going to be easy to utilize for years to come.

Can A SwimSpa Cover Save A Life?

Toddler Falls on SwimSpa Cover

It’s not everyday that SwimSpa covers make the news. But it did happen recently in Florida a kid fell from a three story balcony and landed on, you guessed it a SwimSpa cover.

As a grandparent the first thing that enters your mind is, “How was this allowed to happen?” Fortunately this story has a happy ending (the little child was fine and ran back up stairs to tell his grandpa just what happened) but just how did the little guy fall?

From now on lets lock the sliding glass door to stop this future stuntman from duplicating this maneuver. Next time he may miss the swimspa entirely.

A few years ago “Dwarf Tossing” was a popular. After That “Dwarf Bowling” and a couple of various other games along the same lines. Without taking a side as to the civil liberties of dwarfs to be thrown for sport and also amusement, let’s just nip “Toddler Tossing” in the bud before to it too ends up being the brand-new fun game.

In our personal experience a lot of activities seem like a good idea to kids. A number of them seem to lack the “anxiety” genetics or chromosome to alert them to possible danger. As amusing as it may be to view videos of pets misjudging their leaping abilities, nobody wishes to see this with young children.

If on the other hand you would like to lay your toddler delicately on your swimspa cover for some reason, let’s discuss some ground rules first to ensure safety and happy endings.

First guideline. The swimspa or hot tub must be no higher than deck level. If your hot tub is free standing, the range from the edge of the swimspa to the ground would certainly suffice to harm your toddler so better to lay the little bugger on the ground compared to on the swimspa. If on the other hand your spa is flush with the deck it MAY be alright. Carry on to rule two.

Regulation Two. The cover must be properly protected in such a way as to guarantee that the young child can not by mishap or intent access to the swimspa water listed below. Neither by a fall from a great height, substantial impact or other circumstances.

Rule Three. The hot tub cover would have to be a comfortable location to lay one’s kid. If the hot tub cover is a rigid piece of foam it should to be considered not appropriate for kid laying. If the swimspa cover allows a padding like gentleness that will certainly comfort and also embrace the toddler then continue to rule three.

Regulation Four. If a young child is relaxing conveniently on a soft swimspa cover, there should be no jumping on the cover by other individual or pet. This would dislodge the kid and can possibly cause harm.

If you or a person you know would like to purchase such a swimspa cover, visit SpaCap.com

The folks at SpaCap.com have actually been developing Custom SwimSpa Covers for more than forty years. A SpaCap.com Custom SwimSpa Coverdoes not use rigid foam like other hot tub covers. Rather SpaCap.com swimcovers use air chambers to do the insulating and protecting.

This means your new Custom SwimSpa Cover will stay light-weight and easy to use for years to come.

H2X SwimSpa Covers

Swimspa Covers for H2X Swimspas

Need a new lightweight cover for your H2X swimspa?

The H2X by Master Spas were created “with input” from the popular Olympic swimmer, Michael Phelps, and his coach, Bob Bowman, and the specialist designers of Master Spas.

The company internet site asserts that these are just one of the most energy-efficient swim spas in the market, as a result of the green icynene foam insulation. In their very own words, “Every swim spa is constructed to not just fulfill but to exceed the strict California Energy Commission (CEC) efficiency criteria.” They additionally have high density polymer base which keeps away pests as well as helps to keep the heating, manifold pipes which ensures the equivalent spread of pressure in the jets.

They likewise include Noise Reduction, EcoPur as well as Ozone systems. The EcoPur ® System consists of a filter which incorporates a mix of minerals which aid not only the removal of bigger contaminations, yet additionally of the microorganisms as well as heavy metals, causing softer water. The Ozone System eliminates the microorganisms, making the water fresh as well as tidy.

Its Wave Propulsion ™ Technology System supplies you a swimming experience with much less disturbance and the SwimNumber ™ System enables you to set the suitable swimming, training speed according to your needs. Some exercise programs are pre scheduled, so you could pick in between the beginners, intermediate or sophisticated degrees. Again it is offered in a variety of lengths and also configurations consisting of the spa on one end that can be at a different temperature level. The one noticeable distinction is the housing. On the pump end, the one you swim towards, a foot to eighteen inches is used up by the pump functions. Not a big deal but if your buying  SwimSpa Covers for it, you’ll be covering that section too.

One essential factor that could truly dampen your pleasure is trying to lift heavy, SwimSpa Covers off and back onto the swimspa. Standard rigid foam filled SwimSpa Covers will constantly end up saturated with water inside the foam. What you need is a different kind of SwimSpa Covers that will be easy to use and stay lightweight for years. These custom made SwimSpa Covers are available in more than sixty colors of Marine Grade Sunbrella fabric, the best fabric on the planet for outdoor use. Visit SpaCap.com and order one of their Lightweight SwimSpa Covers that are made in the USA and will not get heavy or break

Lightweight SwimSpa Cover

Looking for a Lightweight Cover For Your Swim Spa?

The covers that come with a SwimSpa typically have more sections than a standard hot tub cover. Regrettably, it will still get heavy much like a normal spa cover.

With more areas, they will typically fill at various rates so you end up playing musical chairs with the areas you can still lift. Ultimately, you might even stop aiming to use the bar lifters and simply open 2 sections in the center so you can use the spa.

Even with the bar lifters, getting a saturated swimspa cover back up onto the spa can be a battle. If you have a bad back it’s down best dangerous because of the height of the spa.

Obviously you’ll want to change the SwimSpa Cover with something that will be simpler so you can keep using your spa.

The SpaCap.com Lightweight SwimSpa Covers make the removing your SwimSpa Cover as easy as taking a comforter off a bed. Unlike heavy spa covers that need 2 or more people to raise, SpaCap.com Lightweight SwimSpa Covers can be returned on in seconds normally with one hand.

The SpaCap.com Lightweight SwimSpa Covers use Sunbrella Marine Fabric on the outside which is far superior to the typical spa cover vinyls. All vinyls are rated by HOURS outdoors where Sunbrella is rated by YEARS.

So Sunbrella, not only safeguards your swim spa from scorching sun, rain as well as heavy snowfall, however also last longer than other covers. Since they use air chambers instead of rigid foam, the SpaCap.com Lightweight SwimSpa Covers do not break or get heavy with time.

Energy Efficient

Backed by a 3 years warranty on products and craftsmanship, energy efficient SpaCap.com Lightweight SwimSpa Covers make sure a low ownership cost.

Searching for A Customized SwimSpa Cover?

Give them a shout! Their craftsmen with 20 years of experience can make a custom SwimSpa Cover for you.

Commandeering The Short Lady’s Car

One day a fellow officer called for back up to fight at bar. Unfortunately Curt was having his patrol vehicle worked on and he didn’t have another mode of transportation so he stepped out into the street and flagged down a passing motorist to commandeer their vehicle. Turned out it was a little old lady in her early seventies. Probably about four feet tall. “Move over mam, I need to commandeer your vehicle for an emergency,” said Curt as he jumped in behind the steering wheel. The woman dutifully scooted across to the other side of the bench seat. No doubt shocked at what was happening. Since she had the seat so far forward due to her height, or lack thereof, Curt banged his knees hard on the underside of the dash. He groaned but avoided his normal string of curse words. Reaching down to the control side of the seat he released the seat and pushed it back hard with his legs. The woman probably received some degree of whiplash with the sudden push back and sudden stopping of the seat but she said nothing. Curt closed the door, pulled the gear selector into drive and mashed the gas pedal to the floor all in one motion. The car, although it did have a full size V8 engine had probably never been over forty miles per hour since the woman had purchased it. A huge cloud of black smoke poured out from behind as the horse power awakened for the first time in it’s life. The sudden acceleration threw the woman back in her seat as Curt headed toward the call. As he approached the first corner where he needed to make a right turn, he released the gas and tapped the brakes. The brakes, like the engine had not ever been stressed since the woman had bought the vehicle. They pulled hard to the left. Curt managed to break the car to the right and accelerate into the corner, sliding, drifting the car to make the corner at speed and then mashed the gas down again.

Once he arrived at the location that the backup had been called for he stopped the car in the street, “Thank you mam,” he stepped out of the vehicle and walked into the bar. Unfortunately, even though he had arrived in mere minutes, the fight was over. Assistance was no longer needed. Seeing the woman still sitting in the middle of the street, Curt grabbed the first drunk inside the door and said, “Come with me.” He pulled the man out the front door by the collar and waved at the woman. Now her story was complete so she smiled and drove away. Curt took the man back into the bar and sat him back down in the same seat, “Thank you sir. Here let me pay for your next beer.” Curt fetched a five from his wallet and slapped it on the table. The man was so inebriated he really had no understanding of what had just happened but he was more than happy to accept the payment for whatever it was.

Curt then walked over to the officer that had called for back up, “When you’re done here I’m going to need a ride back out to my patrol vehicle.”

Find out more about Curt at The Chief Is Missing

SwimSpa Cover Replacement: Making The Best Choice

The Best Choice in SwimSpa Covers

A swimspa cover is vital for controling energy costs, and to protect the spa from external debris. Traditional spa covers are made with a foam core, and that foam is absorbent. As the foam takes on moisture from seepage and condensation from the heated water rising under a cold closed cover, the cover becomes heavy and difficult to handle. Eventually it will keep you from using your swimspa.

The vinyl material that is typically used to cover a foam core is rated by HOURS which means that when it’s exposed to the sun’s UV rays on a daily basis, it’s going to break down and vulnerable to tearing or being punctured.

The End2End SwimSpa Cover is a relative newcomer to the swimspa cover market. It claims to Lock In Heat and Keep Out Moisture. Admittedly it does have some advantages over the traditional multi piece folding foam swimspa covers. Its one-piece design using closed-cell foam instead of the traditional rigid foam panels prevents it from absorbing water, so it stays light and easy to manage. That much is true. The reason closed cell foam has not been used in the traditional rigid swimspa covers is that it isn’t rigid. It would sag without support.

The roll up cover overcomes that by having a support system built into the cover. The down side is that the rigid support holds the thin layer of closed cell foam far above the water it is supposed to be keeping warm. The result is that it creates a constant storm of evaporation/condensation under the cover which causes the swimspa to work harder to keep the water warm.

End2End claims to have a UV-resistant coating that keeps it strong against the elements and new-looking for years. Unfortunately, this is not true. Although they charge enough to use a more expensive fabric, like Sunbrella, they use cheap canvas. The canvas material won’t last no matter what they claim. In areas that get a lot of sun it will start to fall apart in about one year.

The roll-on, roll-off design makes it easy for a single person to handle. In fact, this exclusive feature makes it possible to roll the cover off a swimspa in less than 60 seconds. It can be rolled in either direction, making it ideal for dual-temperature swimspas. You can roll back the pool side for your daily swim, and then roll back the spa side for relaxing at night. Aside from being extremely easy to take on an off, it requires minimal overhead clearance and gives full visibility on all sides of the swimspa as compared to traditional covers which can be problematic for applications with height restrictions or if you are trying to enjoy views. Admittedly, this is a great improvement over the traditional swimspa covers. The biggest downside is that despite costing three to four times more than a foam filled cover it doesn’t last. Most consumers report that it falls apart in less than two years.

End2End claims that their covers are “Custom made with the highest quality commercial-grade materials, this durable, energy-efficient and lockable safety cover is built to withstand all weather conditions. Its full-frame design makes it able to handle even large loads of snow, and thanks to its UV protected surface, it will not deteriorate from time spent in direct sunlight.” Unfortunately the only part of that statement that is true is that it’s lockable. It will blow off in a mild wind, it will crush or tear apart in a minimal snow load and the UV protection is a total lie.

Made in the U.S.A., the End2End SwimSpa Covers are available in a range of colors. But not nearly as many as the SpaCap.com SwimSpa Covers which can be done in any of the over sixty colors of Marine Grade Sunbrella.

So what’s the down side? Although the closed cell foam is an improvement it has to be supported to keep the rain and debris out of the spa. That support will eventually breakdown and usually in less than two years. It will never be able to handle as much of a snow load as the SpaCap SwimSpa Cover which rests right on the water surface.

The UV resistant coating is a code for, “it will handle a sun a little longer than a traditional cover” but not nearly as long as Marine Grade Sunbrella which is used on the SpaCap SwimSpa Cover.

In the end, The SpaCap.com SwimSpa Covers are still the overall best choice. No other swimspa cover starts insulating at the water surface. A huge advantage since the point is to seal in the heat and keep the water warm.

The SpaCap.com covers are all made in the USA and the Sunbrella fabric will last YEARS longer than any other material, no matter what UV resistant coating they use.

When you really want to get the best swimspa cover on the market you’re still better off with the swimspa cover custom made for your spa by SpaCap.com.

MAAX SwimSpa Covers

Swimspa Covers for MAAX Swimspas

MAAX PowerPool SwimSpas offer several advantages over a traditional pool including a lower cost of ownership, better fitting into small backyards, and installation can be done in just one day! Plus it offers more exercise options than a traditional pool including resistance bands, rowing exercises, and no need to turn at the end of the pool – just keep swimming in one direction! Plus, you can adjust the power of the swim jets to accommodate any skill level. No matter what your age or ability, a MAAX PowerPool provides the ultimate exercise and relaxation environment. Swim, exercise, and relax with a MAAX PowerPool SwimSpa!

At SpaCap.com They are ready to help you design a customized swimspa cover to fit your MAAX PowerPool SwimSpa.

SpaCap.com has been building custom spa covers for forty years. That’s longer than swim spas have been around! During that time the folks at SpaCap.com have developed a swimspa cover design as unique as your custom swimspa.

Does your swimspa have a waterfall? No problem! Is that old foam cover keeping you from enjoying your swim spa? SpaCap.com has the answer. Plus you can get it to match your backyard decor!

All the SpaCap.com SwimSpa Covers are covered with Marine Grade Sunbrella in all the colors Glen Raven Mills offers.

So if you want a custom swimspa cover to cover your MAAX PowerPool SwimSpa that’s as easy to remove as a comforter from your bed visit SpaCap.com and order yours today!