Hey, no offense, but your SwimSpa Cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is among nature’s most erosive compounds. Moisture leaks in and ends up being trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, damp environment is perfect for mold and mildew and other kinds of stinky stuff.
If moisture has permeated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and stinky slime, however also make the cover actually hard to remove, and not as reliable at keeping the heat in the spa. Time for a better type of SwimSpa Cover
Stinky SwimSpa Cover?!?
• Broken or damaged. Split foam cores, ripped or used areas, torn seams. A SwimSpa Cover that loses it’s slanted line, to keep water running off correctly, will eventually start to puddle water, which is most likely time to purchase a new SwimSpa Cover! A SwimSpa Cover with threadbare areas in the vinyl is likewise problem, and although you can stave off the inevitable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Remove your SwimSpa Cover weekly for 2 hours of airing out. A much better SwimSpa Cover can stand up to longer durations, but it’s a great practice to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to leave do so, but don’t eliminate fragile foam panels unless absolutely required.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a SwimSpa Cover with tape and staples, but it won’t stop moisture very well. Even the very best foam filled Lightweight SwimSpa Covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real option is a SwimSpa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not kept routinely with sanitizer and filtering, or is not stunned often enough, germs and algae can benefit from a congenial environment to grow. Low pH, high chlorine or high ozone levels can also weaken the underside of your SwimSpa Cover. Due to the fact that the cover is so near to the spa, it soaks up the chemistry of the spa. Clean, clear and hygienic water is the very best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The reality is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight SwimSpa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be worse than no roofing at all, if an overhanging eave drains water onto the SwimSpa Cover Tidy and condition a spa cover 2-4 times each year, so that it constantly looks excellent, and is safeguarded from the components. Once again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover But it will help your spa dealership pay their bills. If this were actually true a SwimSpa Cover inside would never get smelly and that just isn’t true.
Your Choices
Repair Your SwimSpa Cover!
• Remove to Safe Location: This first step may seem apparent, but you require an excellent place to enable the cover to sit undisturbed from pets, wild animals, and winds. It ought to be a sunny area if possible, or a dry indoor location with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your SwimSpa Cover, strange chemicals can end up in your spa water. Gently tidy all exterior surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, because the panels might end up being harmed throughout elimination or cleansing. But if you figure out that there is something slimy inside, you can typically unzip and get rid of the panel for a cleaning inside and out.
How frequently does your spa dealership anticipate you to do all this? If your swimspa is safeguarded from the majority of sun and rain, two times each year. If it’s visible it must be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
Much better Choice
The most convenient remedy for a foul-smelling SwimSpa Cover is to simply buy a various sort of SwimSpa Cover A foul-smelling swimspa cover simply implies that your cover is taking on moisture, and things are starting to grow! Lightweight SwimSpa Covers from SpaCap.com that does not use foam however has actually sealed air chambers rather will prevent providing the mold and mildew a place to grow in the first place.