SwimSpa Cover Hurting Your Back?

SwimSpa Cover Hurting Your Back?

Even if you are physically strong a stiff breeze can capture the big flat surface area and the SwimSpa cover can quickly get away from you. If you use your tub alone or are not physically strong enough to wrestle it off your swimspa, you require to think about a Hot Tub Cover Lift.

Or better yet consider a cover that doesn’t employ rigid foam panels that can become saturated and heavy. The SpaCap SwimSpa cover is lightweight and built to stay that way. Many swimspa owners report that they can remove their SpaCap Lightweight swimspa covers with one hand. No lifter required.

A cover lift is a mechanical device that connects to the swimspa cabinet body or deck and is created to help you remove your swimspa cover. There can be various methods of operation but they all allow a single person to quickly and safely remove the cover from their swimspa. Providing the foam is not saturated. What happens then is the lifter mechanism will either tear the cover in half because the fabric hinge is not meant to handle the weight of saturated foam or worse, the lifter will be torn off the side of the hot tub.

Cover lifts can also serve another function, and that’s of storage while you are utilizing your hot tub. When you remove the top you need to put it somewhere. If you do not have a deck, that frequently means putting it on the ground. Even if you do have a deck, you may not desire a substantial hot tub cover obstructing the method.

Quick and basic, with nothing to wear out – other than for perhaps that costly new hot tub cover you’ve simply purchased. The friction of moving the spa cover back and forth may eventually harm the vinyl covering so this is something you have to enjoy thoroughly.

Or again you could just eliminate the need for a lifter by getting the only kind of cover that uses air instead of foam to insulate. A Lightweight swimspa covers that is as easy to use as taking a fluffy comforter off a bed. Something designed by a single woman so she could use her hot tub by herself. The only Lightweight swimspa coversthat comes in Sunbrella Marine Fabric instead of vinyl. Imagine having a cover thats not only lightweight but that can match your decor. But lets keep going with the whole cover lifter idea.

Another range shops the folded hot tub cover in a vertical position so that it obstructs the view on one side. Make sure that the cover can be locked in the up position so there is no risk it can fall back down, injuring somebody.

Wait did that just say the cover could fall on you while your in the spa? That’s like the opposite of helpful.

A third kind of lift helps you to remove the hot tub cover and holds the folded cover behind the spa. It often takes a little bit more effort to run this kind, and you do have to have about a foot of clearance behind the spa for the cover. But the lower profile removes the concern of a blocked view.

This is also the most common type of cover lifter sold. What anyone can tell you is that it doesn’t help you fold the cover over the first time once it gets heavy. So if the cover is too heavy to lift, it isn’t going to help you at all. And when they say, “It takes a little more effort to operate” it may qualify as the biggest understatement of the year.

One item to research study thoroughly is whether the lift you are considering locations tension on center hinge of your swim spa cover. This hinge is normally not developed to carry the full weight of the cover in a hanging position, and some kind of lifts can place a real pressure on it. Just so there are no surprises it would be wise to ask this concern prior to making your purchase. There are some after market packages that can avoid this problem, however that is at an additional expense. Some lifts are designed to move to weight to the outer edge of the tub and get rid of the tension to the hinge.

Lifts are crafted to fit various spa sizes and the majority of swimspa cover raises can be installed by the homeowner utilizing tools you would usually have around your house.

Cover lifts can likewise serve another function, and that’s of storage while you are using your hot tub. When you eliminate the leading you have to put it someplace. That regularly indicates putting it on the ground if you do not have a deck. Even if you do have a deck, you may not desire a substantial hot tub cover blocking the method.

After investing countless dollars on a hot tub, cover, chemicals, and operation expenses, spending a few hundred dollars more for a cover lift will make your hot tub experience and the pressure on your back much less demanding.

If you utilize your tub alone or are not physically strong enough to battle it off your SwimSpa spa, you need to think about a swimspa cover Lift that won’t get heavy or break. Something like say the SpaCap

How to best place your SwimSpa

So you finally got a SwimSpa! Great. Now here are a few things to help you get the most out of it for years to come.

1) Don’t shove it in a corner! Place your swimspa so that you can walk around it on all sides. Leave enough room so that you can take the cover off and on easily. The more room you leave around the swimspa the better.

2) Don’t put the cover inside a portable garage! This might seem like a good idea, but having a garage barely big enough to fit over the swimspa makes using any cover even more difficult. Again, the key is to have enough room to get around all four sides comfortably so that getting your cover off and on is not a struggle.

3) Consider a deck all the way around about eighteen inches from the top of the swimspa. This makes it easier to get in and out of the swim spa and it also makes getting the swimspa cover off and on a lot more easy. A free standing swim spa can be five feet tall on a concrete pad. That makes it pretty young for a woman to get any cover off and on by herself. Having a deck, bench high, will make it much easier.

We suggest getting a swimspa cover that will be easy to use and last YEARS longer than any foam filled swimspa cover. Check out the swimspa covers at SpaCap.com. Not only do their covers last longer and stay lightweight, they are also available in over 60 colors so they can compliment any backyard design.

Before You Buy Your Next SwimSpa Cover

Before You Buy Your Next SwimSpa Cover

What You Should Know Before Buying a New SwimSpa Cover

If you have to replace your SwimSpa Cover this year, there are few essential things you must think about. A SwimSpa Cover is your spa’s first line of defense versus particles and severe weather and is the key to saving money on energy costs as a well-insulated SwimSpa Cover will avoid heat from leaving from the swimspa when it’s not in use.

Here’s what you must understand before purchasing a brand-new SwimSpa Cover

When to Replace a SwimSpa Cover

A SwimSpa Cover usually has to be replaced every 3 to five years if you reside in a northern location and every three to 7 years, if you reside in a warmer area.

Try to find any rips or tears in the vinyl, check the underside of the SwimSpa Cover and try to find wear and tear from mold build-up and chemicals. This takes place since all vinyls are ranked by HOURS outdoors. And the moldy and moldy smell originates from that the foam produces almost best lab conditions for growing mold and mildew.

The solution then to both of these problems would be to change your SwimSpa Cover with one of the Custom Lightweight SwimSpa Coversmade by SpaCap.com At SpaCap.com they utilize Sunbrella Marine material which is rated by YEARS outdoors instead of vinyl, and air chambers rather of foam.

A replacement SwimSpa Cover is needed if your old one is waterlogged and heavy and a struggle to get rid of. This is a clear indication that the foam cores are saturated with water.

Again, another factor not to buy another foam filled SwimSpa CoverNo matter exactly what the spa dealer tells you, the truth is that every foam SwimSpa Cover ever made is going to end up just like the one you have to replace now.

The SpaCap.com Lightweight SwimSpa Covers with air chambers instead of foam don’t have the mold growing problems and they don’t fill with water. They remain light-weight and easy to use for several years to come.

The concept that a thicker foam cover is going to insulate much better is flawed thinking.

A quality foam filled SwimSpa Cover will be from four to six inches thick. A spa dealer will tell you that if a SwimSpa Cover is too thin, it will not be able to stand up versus severe weather condition conditions and you’ll have to change it more frequently.

What saves you money is a SwimSpa Cover that insulates much better than foam. The Custom Lightweight SwimSpa Covers from SpaCap.com insulate much better than foam without the issues of foam.

If you reside in an area that gets a great deal of snow throughout the winter season, a rigid foam cover, no matter how thick will be crushed by a snow load. Which is why numerous ski resorts around the globe have actually switched to Lightweight SwimSpa Covers made by SpaCap.com

Selecting a Color

Picking the right color for your SwimSpa Cover is an enjoyable however essential choice, as they can boost and match your surroundings. Here is where all the color options available from SwimSpa Cover, actually shine. Rather of settling for the five or 6 colors the regional spa dealership has to provide, you can select from more than SIXTY colors offered from SpaCap.com

Do not just purchase another SwimSpa Cover that is going to end up heavy or broken like the one you have now. Go to SpaCap.com and get a SwimSpa Cover that is going to be easy to utilize for years to come.

How to best place your SwimSpa

So you finally got a SwimSpa! Great. Now here are a few things to help you get the most out of it for years to come.

1) Don’t shove it in a corner! Place your swimspa so that you can walk around it on all sides. Leave enough room so that you can take the cover off and on easily. The more room you leave around the swimspa the better.

2) Don’t put the cover inside a portable garage! This might seem like a good idea, but having a garage barely big enough to fit over the swimspa makes using any cover even more difficult. Again, the key is to have enough room to get around all four sides comfortably so that getting your cover off and on is not a struggle.

3) Consider a deck all the way around about eighteen inches from the top of the swimspa. This makes it easier to get in and out of the swim spa and it also makes getting the swimspa cover off and on a lot more easy. A free standing swim spa can be five feet tall on a concrete pad. That makes it pretty young for a woman to get any cover off and on by herself. Having a deck, bench high, will make it much easier.

We suggest getting a swimspa cover that will be easy to use and last YEARS longer than any foam filled swimspa cover. Check out the swimspa covers at SpaCap.com. Not only do their covers last longer and stay lightweight, they are also available in over 60 colors so they can compliment any backyard design.

Why You Need A SwimSpa

The compact, multi-purpose system that combines the swimming pool and spa is understood to have essential advantages for a wide variety of people and circumstances.

Numerous market details instructors as well as professional athletes enjoy the exceptional work-out they get while using a SwimSpa. The benefits of possessing a residence SwimSpa are numerous, just not just takes place to be the spa beneficial for professional athletes involved on their endurance training, but they’re additionally best for those that are trying to find therapeutic and rehabilitation, like when recuperating originating from a sport’s injury or needing alleviation from joint and muscle mass problems.

SwimSpas streamline points for anyone that would have to drop a couple of pounds as well as desire to obtain in shape safely, as well as for those that would should try equilibrium. Maybe the senior enjoy the low-impact exercise they will have the ability to achieve in a SwimSpa.

Swimming is a reputable entertaining way to obtain a reliable cardio-vascular work-out, as well as it’s amongst of one’s safe tips to exercise, particularly if when compared to running or affordable sports where injuries are easily sustained. Runners are affected by problems particularly shock on their spinal column, or injury to feet and ankle bones, as well as especially knees. People who work-out in restorative waters like a Swim Spa have far couple of injuries.

Lots of water workouts have actually been established for SwimSpas, such as reduced effect cardio exercise and also an underwater pilates program. Mild extending becomes simpler when ended up in warm water even energetic workout programs are much less strenuous or tiring. Cardio tools such as rowing bars, and also weights training tools can be obtained that will assist build muscle as well as cardio-vascular health and fitness.

With adjustable control settings for the effective jet streams, the fluids current can quickly be adjusted for routine lap swimming, or interval training for circumstances swimming to create a short time period against a more powerful present and then resetting dials to alternative milder existing.

Running inside the waters of a brand-new SwimSpa from the steady present replicates the effects of a treadmill, and also it’s simple to change the workout strength chosen. For individuals with an uncomfortable time with flexibility of activity, a water exercise regimen could really be the only ideal program that maintains muscles flexible as well as devoid of discomfort while staying mobile and also obtaining workout.

While massaging the physical body with therapeutic actually warm water jet streams, the atmosphere is way much easier for your body to remainder, experience remedy for pain, and obtain sufficient remainder every night. Every one of this advertises a comfortable environment for healing.
Thinking about every one of those intensity of your anxiety peaking today are prone to even more intense speed, health has actually transformed out to be a huge issue for everybody. It has become important to find techniques that could aid to soothe this tension, while promoting wellness, deep leisure and also rest.

SwimSpas provide a perfect solution, with lots of opportunities for exercise and treatment. Possessing a SwimSpa whether for work-out or lasting therapy, the advantages gained promptly make the residence spa an indispensable addition to any type of residence.

Remember when it’s time to change your SwimSpa Covers, SpaCap.com is the very best to get a customizeded, light weight, very easy to make use of SwimSpa Cover

SwimSpa Cover Challenges

SwimSpas represent distinct difficulties when it comes to covering them.
We can all agree that the swimspa needs to be covered when not in use for all the same factors a hot tub needs a cover. The challenge is that because of the length of the swimspa and the height of the sides, removing and replacing the cover can be a lot more difficult.
Getting a brand-new swimspa is an exciting event in life. You’re anticipating the exercise you’ll receive from using it. Maybe you’re a little relieved to have lastly made a selection from the various models you looked at. At any rate, you most likely weren’t thinking much about the cover you would use.
Normally, the cover that comes home with your new purchase will be a 4 section stiff foam filled cover that will divide in the center and go off both ends.
No big deal.
Up until it starts to get heavy.
Which it constantly does.
Every rigid foam filled SwimSpa Cover ever made winds up the same way and it is not the fault of the user. It’s a style flaw. Integrated in obsolescence because as soon as it is placed in use over the warm water in your swimspa it is inescapable.
It’s not from rain, so having a taper will not make any difference. In fact you could have it under a roof and the cover will still get heavy.
The reason is the steam from the water. The particles of steam are really small as they increase from the water surface area. They make their method into the little cracks and crevices in the foam. Then as the steam cools it forms back into a liquid and becomes caught in the cover.

It takes place slowly and on a SwimSpa Cover which is made of specific sections, at differing speeds. So ultimately you’ll see one or two of the sections are truly getting heavy. The bar lifters on completions of the swimspa aren’t much help since you still need to raise that heavy cover back up onto the spa which is a lot higher than a routine spa.
This is why SpaCap.com developed a different design for their SwimSpa Covers
Instead of using numerous foam panels to construct SwimSpa Covers that will eventually end up in some garbage dump, they developed one that utilizes air chambers that do not suck up moisture.
In fact SpaCap.com SwimSpa Covers are light-weight, insulate better, won’t blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine fabric, these covers will not fade, or break down at the seams either. So if you own a swimspa, and you plan to keep using it daily, SpaCap.com has the SwimSpa Cover for it.
If you’re not prepared to order today, bookmark this website so you can find it once again when you’re all set!

Getting The Best SwimSpa Cover

SwimSpas represent unique obstacles when it pertains to covering them.
We can all agree that the swim spa needs to be covered when not in use for all the same reasons a hot tub needs a cover. The challenge is that because of the length of the swimspa and the height of the sides, removing and changing the SwimSpa Cover can be a lot harder.
Getting a new swimspa is an amazing event in life. You’re looking forward to the exercise you’ll receive from using it. Possibly you’re a little relieved to have lastly selected from the different models you took a look at. At any rate, you most likely weren’t believing much about the SwimSpa Cover you would use.
Usually, the cover that comes home with your brand-new purchase will be a 4 section rigid foam filled SwimSpa Cover that will divide in the center and go off both ends.
No big deal.
Until it starts to get heavy.
Which it constantly does.
Every rigid foam filled SwimSpa Cover ever made winds up the same way and it is not the fault of the user. It’s a design defect. Integrated in obsolescence due to the fact that as quickly as it is positioned in use over the warm water in your swimspa it is unavoidable.
It’s not from rain, so having a taper will not make any distinction. In fact you might have it under a roof and the SwimSpa Cover will still get heavy.
The factor is the steam from the water. The molecules of steam are really small as they rise from the water surface. They make their way into the little cracks and crevices in the foam.

Then as the steam cools it forms back into a liquid and ends up being trapped in the SwimSpa Cover
It occurs slowly and on a SwimSpa Cover which is made from private areas, at varying speeds. So eventually you’ll notice one or two of the sections are truly getting heavy. The bar lifters on completions of the swim spa aren’t much aid because you still need to lift that heavy Swim Spa Cover back up onto the spa which is a lot higher than a routine spa.
This is why SpaCap.com developed a different style for their Lightweight SwimSpa Covers
Instead of using a number of foam panels that will eventually wind up in some land fill, they designed Lightweight SwimSpa Covers that uses air chambers that do not suck up moisture.
In fact SpaCap.com Lightweight SwimSpa Covers are easy to use, insulate much better, won’t blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine material, these Lightweight SwimSpa Covers will not fade, or break down at the joints either. So if you own a swim spa, and you plan to keep using it everyday, SpaCap.com has the SwimSpa Cover for it.
If you’re not prepared to buy today, bookmark this website so you can find it once again when you’re all set!

Is Your SwimSpa Cover Hurting Your Back?

Even if you are physically strong a stiff breeze can capture the big flat surface area and the SwimSpa cover can quickly get away from you. If you use your tub alone or are not physically strong enough to wrestle it off your swimspa, you require to think about a Hot Tub Cover Lift.

Or better yet consider a cover that doesn’t employ rigid foam panels that can become saturated and heavy. The SpaCap SwimSpa cover is lightweight and built to stay that way. Many swimspa owners report that they can remove their SpaCap Lightweight swimspa covers with one hand. No lifter required.

A cover lift is a mechanical device that connects to the swimspa cabinet body or deck and is created to help you remove your swimspa cover. There can be various methods of operation but they all allow a single person to quickly and safely remove the cover from their swimspa. Providing the foam is not saturated. What happens then is the lifter mechanism will either tear the cover in half because the fabric hinge is not meant to handle the weight of saturated foam or worse, the lifter will be torn off the side of the hot tub.

Cover lifts can also serve another function, and that’s of storage while you are utilizing your hot tub. When you remove the top you need to put it somewhere. If you do not have a deck, that frequently means putting it on the ground. Even if you do have a deck, you may not desire a substantial hot tub cover obstructing the method.

Quick and basic, with nothing to wear out – other than for perhaps that costly new hot tub cover you’ve simply purchased. The friction of moving the spa cover back and forth may eventually harm the vinyl covering so this is something you have to enjoy thoroughly.

Or again you could just eliminate the need for a lifter by getting the only kind of cover that uses air instead of foam to insulate. A Lightweight swimspa covers that is as easy to use as taking a fluffy comforter off a bed. Something designed by a single woman so she could use her hot tub by herself. The only Lightweight swimspa coversthat comes in Sunbrella Marine Fabric instead of vinyl. Imagine having a cover thats not only lightweight but that can match your decor. But lets keep going with the whole cover lifter idea.

Another range shops the folded hot tub cover in a vertical position so that it obstructs the view on one side. Make sure that the cover can be locked in the up position so there is no risk it can fall back down, injuring somebody.

Wait did that just say the cover could fall on you while your in the spa? That’s like the opposite of helpful.

A third kind of lift helps you to remove the hot tub cover and holds the folded cover behind the spa. It often takes a little bit more effort to run this kind, and you do have to have about a foot of clearance behind the spa for the cover. But the lower profile removes the concern of a blocked view.

This is also the most common type of cover lifter sold. What anyone can tell you is that it doesn’t help you fold the cover over the first time once it gets heavy. So if the cover is too heavy to lift, it isn’t going to help you at all. And when they say, “It takes a little more effort to operate” it may qualify as the biggest understatement of the year.

One item to research study thoroughly is whether the lift you are considering locations tension on center hinge of your swim spa cover. This hinge is normally not developed to carry the full weight of the cover in a hanging position, and some kind of lifts can place a real pressure on it. Just so there are no surprises it would be wise to ask this concern prior to making your purchase. There are some after market packages that can avoid this problem, however that is at an additional expense. Some lifts are designed to move to weight to the outer edge of the tub and get rid of the tension to the hinge.

Lifts are crafted to fit various spa sizes and the majority of swimspa cover raises can be installed by the homeowner utilizing tools you would usually have around your house.

Cover lifts can likewise serve another function, and that’s of storage while you are using your hot tub. When you eliminate the leading you have to put it someplace. That regularly indicates putting it on the ground if you do not have a deck. Even if you do have a deck, you may not desire a substantial hot tub cover blocking the method.

After investing countless dollars on a hot tub, cover, chemicals, and operation expenses, spending a few hundred dollars more for a cover lift will make your hot tub experience and the pressure on your back much less demanding.

If you utilize your tub alone or are not physically strong enough to battle it off your SwimSpa spa, you need to think about a swimspa cover Lift that won’t get heavy or break. Something like say the SpaCap

Lightweight SwimSpa Covers

The covers that come with a SwimSpa have more area to cover than a basic hot tub cover. Regrettably, it will still get heavy similar to a typical spa cover.

With more area, the sections will typically saturate at different rates so you end up playing musical chairs with the sections you can still raise. Eventually, you may even stop trying to use the bar lifters and simply open two sections in the center so you can use the spa.

Even with the bar lifters, getting a saturated swimspa cover back up onto the spa can be a struggle. If you have a bad back it can be down right unsafe because of the height of the spa.

Undoubtedly you’ll want to replace the SwimSpa Cover with something that will be easier so you can keep using your swimspa.

The SpaCap.com Lightweight SwimSpa Covers make the removing your SwimSpa Cover as easy as taking a comforter off a bed. Unlike heavy spa covers that need 2 or more people to lift, SpaCap.com Lightweight SwimSpa Covers can be put back on in seconds usually with one hand.

The SpaCap.com Lightweight SwimSpa Covers use Sunbrella Marine Fabric on the outside which is far superior to the normal spa cover vinyls. All vinyls are ranked by HOURS outdoors where Sunbrella is ranked by YEARS.

So Sunbrella, not only protects your swimspa from blazing sun, rain as well as heavy snowfall, but also last longer than other covers. Because they use air chambers instead of stiff foam, the SpaCap.comLightweight SwimSpa Covers do not break or get heavy with time.

Energy Efficient

Backed by a 3 years guarantee on materials and craftsmanship, the energy effective SpaCap.comLightweight SwimSpa Covers typically last ten to twelve years of easy use, maintenance and energy savings.

Searching for A Custom SwimSpa Cover?

Give them a shout! Their craftsman with 40 years of experience can make a custom SwimSpa Cover for you.

Is Moving Your SwimSpa Cover Hurting Your Back?

Even if you are physically strong a stiff breeze can capture the big flat surface area and the hot tub cover can quickly get away from you. If you use your tub alone or are not physically strong enough to wrestle it off your swimspa, you require to think about a Hot Tub Cover Lift.

Or better yet consider a cover that doesn’t employ rigid foam panels that can become saturated and heavy. The SpaCap cover is lightweight and built to stay that way. Many swimspa owners report that they can remove their SpaCap Lightweight swimspa covers with one hand. No lifter required.

A cover lift is a mechanical device that connects to the swim spa cabinet body or deck and is created to help you remove your swimspa cover. There can be various methods of operation but they all allow a single person to quickly and safely remove the cover from their swimspa. Providing the foam is not saturated. What happens then is the lifter mechanism will either tear the cover in half because the fabric hinge is not meant to handle the weight of saturated foam or worse, the lifter will be torn off the side of the hot tub.

Cover lifts can also serve another function, and that’s of storage while you are utilizing your hot tub. When you remove the top you need to put it somewhere. If you do not have a deck, that frequently means putting it on the ground. Even if you do have a deck, you may not desire a substantial hot tub cover obstructing the method.

Quick and basic, with nothing to wear out – other than for perhaps that costly new hot tub cover you’ve simply purchased. The friction of moving the spa cover back and forth may eventually harm the vinyl covering so this is something you have to enjoy thoroughly.

Or again you could just eliminate the need for a lifter by getting the only kind of cover that uses air instead of foam to insulate. A Lightweight swimspa covers that is as easy to use as taking a fluffy comforter off a bed. Something designed by a single woman so she could use her hot tub by herself. The only Lightweight swimspa coversthat comes in Sunbrella Marine Fabric instead of vinyl. Imagine having a cover thats not only lightweight but that can match your decor. But lets keep going with the whole cover lifter idea.

Another range shops the folded hot tub cover in a vertical position so that it obstructs the view on one side. Make sure that the cover can be locked in the up position so there is no risk it can fall back down, injuring somebody.

Wait did that just say the cover could fall on you while your in the spa? That’s like the opposite of helpful.

A third kind of lift helps you to remove the hot tub cover and holds the folded cover behind the spa. It often takes a little bit more effort to run this kind, and you do have to have about a foot of clearance behind the spa for the cover. But the lower profile removes the concern of a blocked view.

This is also the most common type of cover lifter sold. What anyone can tell you is that it doesn’t help you fold the cover over the first time once it gets heavy. So if the cover is too heavy to lift, it isn’t going to help you at all. And when they say, “It takes a little more effort to operate” it may qualify as the biggest understatement of the year.

One item to research study thoroughly is whether the lift you are considering locations tension on center hinge of your swim spa cover. This hinge is normally not developed to carry the full weight of the cover in a hanging position, and some kind of lifts can place a real pressure on it. Just so there are no surprises it would be wise to ask this concern prior to making your purchase. There are some after market packages that can avoid this problem, however that is at an additional expense. Some lifts are designed to move to weight to the outer edge of the tub and get rid of the tension to the hinge.

Lifts are crafted to fit various spa sizes and the majority of swimspa cover raises can be installed by the homeowner utilizing tools you would usually have around your house.

Cover lifts can likewise serve another function, and that’s of storage while you are using your hot tub. When you eliminate the leading you have to put it someplace. That regularly indicates putting it on the ground if you do not have a deck. Even if you do have a deck, you may not desire a substantial hot tub cover blocking the method.

After investing countless dollars on a hot tub, cover, chemicals, and operation expenses, spending a few hundred dollars more for a cover lift will make your hot tub experience and the pressure on your back much less demanding.

If you utilize your tub alone or are not physically strong enough to battle it off your spa, you need to think about a hot tub cover Lift. Or better yet, think about getting a cover that won’t get heavy or break. Something like say the SpaCap