Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at one time or another; water is among nature’s most erosive substances. Moisture seeps in and ends up being trapped between the external vinyl shell and the plastic wrapped foam cores. The warm, wet environment is best for mold and mildew and other kinds of stinky stuff.
If moisture has actually penetrated further into the plastic wrapped foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and smelly slime, but likewise make the cover truly challenging to remove, and not as efficient at keeping the heat in the spa. Time for a much better kind of Swim Spa Cover

Stinky Swim Spa Cover?!?
• Broken or harmed. Broken foam cores, ripped or used areas, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off properly, will eventually begin to puddle water, which is most likely time to buy a new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also bad news, and although you can fend off the unavoidable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Remove your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can withstand longer periods, but it’s a good practice to get rid of the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit wetness to leave do so, but do not eliminate delicate foam panels unless definitely needed.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, but it will not stop moisture very well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only genuine service is a Swim Spa Cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not preserved routinely with sanitizer and filtering, or is not stunned frequently enough, bacteria and algae can take advantage of a congenial environment to grow. Low pH, high chlorine or high ozone levels can likewise deteriorate the underside of your Swim Spa Cover cover. Since the cover is so close to the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent stinky spa covers. (Sorry but this is simply BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times annually, so that it constantly looks terrific, and is protected from the aspects. Again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover However it will assist your spa dealer pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This first step might appear apparent, however you require a good location to permit the cover to sit undisturbed from animals, wild animals, and winds. It should be a bright place if possible, or a dry indoor area with low humidity can also be used.
• Deodorize & Disinfect: You may not have to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Gently tidy all exterior surface areas with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this need to be avoided if possible, since the panels might become damaged throughout removal or cleansing. But if you determine that there is something slimy within, you can typically unzip and remove the panel for a cleansing inside and out.

How frequently does your spa dealership anticipate you to do all this? If your swim spa is safeguarded from the majority of sun and rain, two times per year. If it’s exposed it ought to be 3-4 times annually. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The most convenient remedy for a foul-smelling Swim Spa Cover is to simply purchase a various type of Swim Spa Cover A smelly swim spa cover just suggests that your cover is handling moisture, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has sealed air chambers instead will avoid providing the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *